Hypertherm Consumables

AUTHORISED OEM SELLING CONSUMABLES & PARTS IN THE INDIA

We have genuine Hypertherm plasma consumables and spare parts in the INDIA. We offer competitive prices and superb service. We support current and discontinued machines and Hypertherm plasma cutting systems.

If you are looking for Hypertherm consumables, torches or torch assembly options it’s very important you order the correct parts based on your system, material.

SHIELD CAP

Hypertherm-Consumables-Retaining-Cap

The shield cap is the outer consumable that holds the shield within it. Inspect it occasionally for cracks or burn marks, as well as to ensure the shape is still perfectly round and smooth.

Some Parts numbers are as follows:
220936 SHIELD CAP:HyPro2000 O2/AIR
220173 SHIELD CAP:W/IHS Tab, 130 Amp
220398 SHIELD CAP:260 Amp
220935 SHIELD CAP:HyPro2000/MAXPRO200
420793 SHIELD CAP:MAXPRO200

SHIELD

Hypertherm-Consumables-Shield

The shield is the outer and bottom most part of a functioning plasma torch. It is the item that you replace rather frequently, depending on the thickness cut; these should last about 3 times electrode and nozzle sets.

Some Parts numbers are as follows:
220407 SHIELD:HPR 260 AMPS STAINLESS STEEL / ALUMINUM
220491 SHIELD:MAXPRO200 130 AMPS O2 MILD STEEL
220627 SHIELD:HPR 100 AMPS STAINLESS STEEL
220673 Shield, T45m, 15-45 A, mechanized cutting

NOZZLE RETAINING CAP

hypertherm-nozzle-retaining-cap

This is probably the most durable of all Hypertherm XPR consumables as it is protected by the shield and shield cap. Make sure all of the orifices are clean of debris and make sure the O-ring is not damaged and present.

NOZZLE

Hypertherm-Consumables-Nozzle

The nozzle should always be replaced with the electrode as a pair. A larger orifice and an irregularly shaped hole are tell-tale signs it needs to be replaced. However, don’t mistake discolouring of the nozzle as a sign of wear out. The colour of the copper does not have any impact on the quality of the cut.

SWIRL RING

Hypertherm-Consumables-Swirl-Ring

The swirl ring controls and swirls the plasma gas around the electrode and into the nozzle. If you see any clogs or cracks, it is time to replace your swirl ring. They are quite durable which means they only need to be replaced if the ring has cracked, or if there is excessive corrosion. For optimal cuts,  make sure the holes in the swirl ring are free of debris and your O-rings are present and in good condition.

ELECTRODE

Hypertherm-Consumables-Electrode

The electrode generates the plasma arc. The tip of the mild steel electrode is filled with a certain amount of hafnium. As the electrode wears this hafnium is depleted and you will see the crater in the tip of the electrode becoming bigger. The bigger it gets the more worn out the electrode becomes and a replacement might be needed. Every time you change an electrode you also should change the nozzle (they are a pair).

POWER OF HYPERTHERM CONSUMABLES

To keep your machine performing its best, also to avoid causing any damage, we recommend to always go for genuine Hypertherm consumables. Thanks to a range of patented technologies, Hypertherm consumables are long lasting and will provide a high precision cut  quality time after time.

Power-of-Hypertherm-Consumables