Products


Laser Cutting Machine

Product Details

LOW POWER LASER CUTTING SYSTEMS (SOLID STATE LASER-YAG LASERS)

YAG Cutting machine is a kind of processing equipment at very competitive price with multi function, suitable for metal cutting, punching and welding. It works stably, processes well with high efficiency, operate and maintain easy.

  • Adopts high grade gantry hard optical path structure. When Processing, laser head moves instead of material. This guarantees the stability of optical path and raises cutting accuracy.
  • Gantry structure and material can be loaded and unloaded from three directions. It is quite easy for operating.
  • High precision tracking system is easy for protection. The precision will not be affected if thermal deformation happens when working platform and bed are cutting.
  • The lathe is driven by high precision ball screw. The speed of single axis can reach 20 meters per minutes.  The Processing is very effective.
  • Uses lubricating grease to ensure the precision and working life of tracking parts.
  • Adopts flat working platform with handheld operating box. It is easy to operate and much more personalized.
  • Has advanced aluminium alloy chamber sealing system and more effective for dust proof compared with open type sealing system.
  • High grade editing and trepanning function and possesses special function of punching and sharp angle processing.
  • High precision self sensing system guarantees cutting quality.

TECHNICAL SPECIFICATIONS OF MACHINE:

Component

Introduction

Laser Device 600W Solid state laser machine
Power Supply 600W Pulse Laser System
Cutting Head Professional high precision head
Cooling System

Over temperature protection, temperature stability ±0.5°C, environmental protection two cycle water cooling machine, titanium alloy evaporation tube control, 7P all in one cooling tank.

Mechanical Drive System High Precision ball screw; original Panasonic servo motor; Taiwan HIWIN Guide rail
Tracking & Sensing System High precision self sensing ;accuracy ± 0.1mm
Working Area 1500 X 3000mm
Computing System IPC
X Axis Servo Unit 1000W Single driven
Y Axis Servo Unit 3000W Single driven
Limit Switch NPN
Cutting Software V2.0
I/O Card 32 Points
Working Platform Gantry Type


TECHNICAL SPECIFICATIONS OF LASER SOURCE

Component

Introduction

Laser Wavelength 1064nm
Maximum Laser output Average power 600W
Laser Repeated Frequency 1-300Hz
Power Instability

=<5%

Minimum Line cutting width 0.2mm (For material below 0.4mm)
Maximum Cutting speed =<3.8m/min (depend upon different material)
Maximum cutting thickness =<9mm (Carbon steel) =<8mm (Stainless steel)
Continuous operating time >=20 Hours
Maximum cutting Breath 3000mm X 1500mm
Working Platform Accuracy ±0.08mm
Repeat location accuracy ±0.02mm
Power Supply Three phase five line exchange 380V±5%, 50Hz±1%
Software Phase selecting provided
Weight of Machine (Estimated) 4200Kg


Equipment Cutting Indexes (This is only for your reference. Speed may be different as for different figures. It should be based on the practical test result.)

Material

Thickness (mm)

Speed (mm/s)

Auxiliary Gas

Stainless Steel

0.3

63

O₂

Stainless Steel

0.5

50

O₂

Stainless Steel

1

40

O₂

Stainless Steel

2

25

O₂

Stainless Steel

3

13

O₂

Stainless Steel

4

10

O₂

Stainless Steel

5

6

O₂

Stainless Steel

0.3

45

N₂

Stainless Steel

0.5

35

N₂

Stainless Steel

1

28

N₂

Stainless Steel

2

18

N₂

Carbon Steel

1

45

O₂

Carbon Steel

2

30

O₂

Carbon Steel

3

15

O₂

Carbon Steel

4

12

O₂

Carbon Steel

5

7

O₂

Carbon Steel

6

5

O₂

Aluminium Sheet

1

12

O₂

Advantages of system

  • Higher cutting speed and low cost, operation safe & stable function.
  • Smooth & fine edge or surface and small distortion.
  • Low running cost as compared to CO₂ laser
  • Low maintenance cost.
  • Imported servo motor and Gearing system to Guarantee Precise cutting

Applications
It can applied to advertisement board, metal plate structure, high and low voltage electric appliance cabinet,  parts of textile machinery, kitchenware, vehicles, machines, ,metal crafts, parts of electric appliances, glasses industry, hardware etc. It can used to cut stainless steel, Carbon steel, alloy steel, spring steel, galvanized sheet, copper plate, aluminium plate, gold, silver, titanium and other metals. The maximum cutting thickness is 9mm of carbon steel.